Skip to main content
Coordination & CareScope #08

Concrete Repairs and Remediation

Honest assessment and practical repair or section replacement when existing concrete slabs, paths or hardstands suffer damage, trip steps or service cut-outs.

Not every damaged concrete surface can be fixed with a thin skim coat—and not every cracked bay requires tearing up the whole yard. Understanding whether movement is active structural subsidence or localized surface wear determines the sensible repair path.

Slab Mates performs saw-cut bay removals and dowelled replacements, plumbing trench reinstatements, localized spall patching with proprietary repair mortars, and control-joint cleaning and flexible resealing.

Diamond saw-cut concrete pavement bay prepared for replacement with compacted crushed-rock base and steel load-transfer dowel bars.
Illustrative trade detail — concrete repairs and remediation.
Construction DetailSCHEMATIC — NOT TO SCALE
EXISTING SLABSAW-CUT & REPLACED BAYRE-COMPACTED BASE + DRILLED DOWELS
Saw-cut slab bay replacement detail showing square perimeter cuts, compacted base reinstatement and drilled epoxy/greased dowels.
Included in Scope

What this service covers

  • On-site visual inspection to distinguish localized surface damage from broader ground movement
  • Full-depth diamond saw-cutting, breakout and disposal of uplifted or shattered concrete bays
  • Sub-base re-compaction, drilling/fixing of load-transfer dowels (where appropriate) and fresh bay pours
  • Reinstatement of internal/external slab trenches following under-slab sewer or water pipe repairs
  • Localized edge spall repairs using polymer-modified structural repair mortars and joint resealing
Explicitly Excluded

What sits outside this scope

  • Forensic structural engineering investigation or underpinning/resin-injection foundation lifting
  • Cosmetic colour-matching guarantees (new concrete naturally weathers differently from aged concrete)
  • Remediation of structural framing or multi-storey concrete cancer without an engineer’s repair specification

Note: Structural design and certification must be completed by an appropriately qualified structural engineer. Confirm specific inclusions and local licensing applicability on your written quote.

Who this suits

  • Property managers and strata bodies eliminating pedestrian trip steps caused by tree roots or settlement
  • Homeowners and commercial tenants reinstating floor slabs after emergency plumber trenching
  • Warehouses repairing spalled saw-cut joint arrises along forklift aisles

What we need from you

Having these inputs ready speeds up quoting and keeps site dates accurate:

  • Photos and measurements of the damaged concrete area and surrounding access
  • History of the issue (e.g. tree roots, plumber cut-out, heavy vehicle damage or ongoing ground movement)
  • Engineer repair specification if the element is a primary structural building member

Step-by-step process

  1. 01

    Inspect & scope honestly

    We inspect the defect; if structural engineering review is needed first, we tell you upfront before quoting.

  2. 02

    Saw-cut & prepare substrate

    Damaged concrete is saw-cut cleanly to sound edges, broken out and the underlying base reinstated.

  3. 03

    Dowel, reinforce & reinstate

    Membranes, dowels, mesh or repair primers are installed and new concrete/repair mortar placed flush.

  4. 04

    Joint seal & tidy handover

    Perimeter joints are neatly finished or sealed and curing barricades/return-to-use timings confirmed.

Repairs & Remediation — Common questions

Will a replaced concrete bay match the exact colour of old surrounding concrete?+

No—fresh concrete and aged weathered concrete always differ in shade initially, even with similar mixes. Cutting along existing control-joint lines makes bay replacements look clean and intentional.

When should I call a structural engineer before a concreter for cracks?+

If cracks run through house walls, doors are jamming, internal floors are noticeably sloping, or foundation movement appears ongoing, consult a qualified structural engineer first to diagnose the cause.

Can you patch over flaking or dusty concrete with a thin cement topping?+

Unbonded thin cement skims outdoors commonly delaminate. Depending on the substrate condition, either mechanical grinding with an appropriate repair system or full-depth bay replacement is far more reliable.

Related concrete services

Helpful guides

Ready to scope your concrete repairs and remediation?

Send us your suburb, dimensions or engineering PDFs and we’ll come back with a clear written breakdown.